Following features and options are available in our ST400

• Straight cut
• Rugged stainless steel construction
• Multi-lane volumetric, servo auger, and servo liquid fillers
• Easy-changeover parts and stainless storage cart
• Easy-open features like tear notch or micro-perforation
• Robotic pick-and-place unit and automatic cartoning
• Various seal patterns and shapes
• Individual discharge chutes
• Dust suction nozzles
• Static eliminator
• Automatic film tracking
• Gas flush in hopper
• Film edge trimming and suction
• Embossing in the longitudinal seal
• Hot stamp, Inkjet, or thermal transfer printer
• In-feed and out-feed conveyors

Maximum Speed
Up to 70 cycles per minute

Maximum Bag Size
30mm x 160mm

Minimum Bag Size
17mm x 40mm

Maximum Film Width
400mm

Maximum Roll Diameter
400mm

Minimum Roll Width
400mm

Construction: Stainless steel or painted steel

Drive: Stepper motor for main drive (cross jaws)

Machine dimensions without filler: 1205 mm (47 1/2”) wide x 1288 mm (50 ¾“) deep x 1610 (63 ½“) high

Electrical requirements: 400V, 3 phase, 50Hz or 480 V, 3 phase, 60Hz or 220, single phase, 50/60HZ, 6,5 kVA

Air requirements: 6 bars (0,6 Mpa), dry and oil free air 3 NL / cycle

Web roll (Film reel): Maximum outside diameter 400 mm, Ø75 mm core

Control system: Siemens S7-200 or Siemens OP

Here are some additional photos of ST400 Stick Pack